{"title":"SS316L Sanitary Ball Valve | Clamp and True Union | CIP\/SIP | Food and Pharma","description":"\u003ch2\u003eSS316L Hygienic Ball Valve — Full Closure and Dead-Space-Free Design for Food, Beverage, and Pharmaceutical Processing\u003c\/h2\u003e\n\n\u003cp\u003e\n  In the food, beverage, and pharmaceutical industries, there are two types of control points in the process line: those that handle high product flow rates, where a hygienic butterfly valve is more efficient, and those that require an absolutely tight shut-off and a more precise sealing design—sampling points, individual service valves, measurement instrument connections, isolation of individual equipment (heat exchangers, filters, pumps), and precision filling and dosing valves. For these latter points, the \u003cstrong\u003eSS316L hygienic ball valve\u003c\/strong\u003e is the correct component: the ball mechanism provides a tighter shut-off than a butterfly valve of the same diameter, and the hygienic design with a surface roughness Ra ≤ 0.8 µm and food-approved elastomers ensures that each CIP cleaning cycle completely removes any product residue.\n\u003c\/p\u003e\n\u003cp\u003e\n  The fundamental difference from the \u003ca href=\"\/collections\/valvula-de-bola-acero-inoxidable\"\u003estandard industrial SS316 ball valve\u003c\/a\u003e is not in the body material—both are SS316L—but in the \u003cstrong\u003esurface finish, elastomers, and connection system\u003c\/strong\u003e: the hygienic ball valve has an internal surface polished to Ra ≤ 0.8 µm (the industrial ball has Ra 3.2–6.3 µm), EPDM or silicone elastomers approved for food contact according to FDA 21 CFR, and a tool-free detachable Tri-Clamp or True Union clamp connection—everything that distinguishes a hygienic component from an industrial one.\n\u003c\/p\u003e\n\n\u003ch3\u003eWhy a Hygienic Ball Valve Instead of a Hygienic Butterfly Valve\u003c\/h3\u003e\n\u003cp\u003e\n  The hygienic butterfly valve has the highest flow coefficient (greater fluid passage per diameter) and the lowest cost in large diameters. The hygienic ball valve has specific advantages that make it superior at certain points in the process:\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eGreater tightness in shut-off:\u003c\/strong\u003e The ball mechanism provides a tighter shut-off than a butterfly valve of the same diameter—the sphere in contact with two PTFE seats creates a leak-free seal in both directions. The butterfly valve, with its disk that closes peripherally against the seat, may present micro-leaks in the long term at frequent closing points. For sampling valves, precision dosing points, and instrumentation isolation valves where any residual dripping contaminates the sample or affects the measurement, the ball valve is the technically superior option.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eFull, unobstructed passage:\u003c\/strong\u003e In the fully open position, the full-port ball's sphere presents no obstacle to flow—the fluid passes through a smooth circular orifice without a central disk. The butterfly valve, even in the fully open position, has the disk in the center of the flow. For shear-sensitive fluids (proteins, living cells, delicate emulsions), the ball's absence of obstruction minimizes product damage with each opening.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSmaller diameter for the same function:\u003c\/strong\u003e A DN25 (1\") hygienic ball valve allows the same flow rate as many DN50 butterfly valves in small piping installations—in pharmaceutical and biotechnology installations where lines are of reduced diameter (DN15–DN50), the ball valve is the natural isolation component.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eInstallation in any orientation:\u003c\/strong\u003e The hygienic ball valve operates correctly in horizontal, vertical, or inclined positions without restrictions—the butterfly valve has orientation limitations in some designs.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Connections\u003c\/h3\u003e\n\n\u003ch4\u003eTri-Clamp (ISO 2852) — The Universal Standard\u003c\/h4\u003e\n\u003cp\u003e\n  The Tri-Clamp connection is the standard detachable coupling system in the hygienic industry. The two-halve clamp joins the beveled ends of the valve and piping, compressing an EPDM or silicone gasket between them. Disassembly in less than 10 seconds by loosening a single wing nut—no tools, no heat, no risk of contaminating the system.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameters:\u003c\/strong\u003e DN25 (1\"), DN38 (1½\"), DN51 (2\"), DN63.5 (2½\"), DN76.1 (3\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ISO 2852 \/ DIN 32676\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGasket:\u003c\/strong\u003e Food-grade EPDM or silicone included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e New installations in the food, beverage, and pharmaceutical industries where periodic disassembly and inspection are GMP requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTrue Union (American Union) — For Thermoplastic Pipes and Mixed Installations\u003c\/h4\u003e\n\u003cp\u003e\n  The hygienic True Union ball valve has an American union with an O-ring at each end that connects the valve to the pipe using a rotating nut. It allows complete disassembly of the valve without cutting the pipe—simply loosen the two nuts. This is the preferred connection when the pipe is made of thermoplastic material (PVC, CPVC, PVDF) or when compatibility with small-diameter purified water distribution systems is required.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameters:\u003c\/strong\u003e DN15 (½\") to DN50 (2\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eO-ring:\u003c\/strong\u003e FDA-compliant EPDM or silicone depending on fluid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Purified water systems in hospitals and laboratories, installations with PVDF or CPVC pipes, service points in pharmaceutical laboratories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWeldable (Butt Weld) — For Maximum Microbiological Integrity\u003c\/h4\u003e\n\u003cp\u003e\n  Weldable ends allow the valve to be joined to the pipe by sanitary orbital TIG welding—without any detachable gasket inside the circuit. This is the joining system that guarantees the highest possible microbiological integrity at the installation point, eliminating the risk of bacterial contamination at the clamp gasket. It is the priority option in pharmaceutical systems for Water for Injection (WFI), clean steam, and sterile product lines where every detachable gasket represents a potential risk.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameters:\u003c\/strong\u003e DN15 to DN50 most frequently\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e WFI, pharmaceutical-grade purified water, clean steam, sterile product lines in the pharmaceutical industry\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The welded valve cannot be disassembled without cutting the pipe—the dead-space-free design and CIP\/SIP compatibility are even more critical in this format\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterials — SS316L and Hygienic Design\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSS316L Body:\u003c\/strong\u003e 316L (low carbon, C ≤ 0.03%) is the standard stainless steel for equipment in contact with food and medicines. The low carbon content prevents intergranular corrosion in welds and in repetitive SIP sterilization cycles with steam—a problem that would occur with standard SS316 in the long term.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003ePolished SS316L Sphere:\u003c\/strong\u003e The sphere polished to Ra ≤ 0.8 µm ensures that there are no surface micro-irregularities where bacteria can adhere and form biofilm resistant to CIP cleaning. The mirror finish of the sphere ensures that the cleaning fluid removes any product residue in each CIP cycle.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003ePTFE Seats:\u003c\/strong\u003e Virgin PTFE is the standard seat material in hygienic ball valves. It offers practically universal chemical resistance, compatible with all food and pharmaceutical process fluids and with standard CIP solutions (NaOH, HNO₃, chlorinated disinfectants). The softness of PTFE on the SS316L sphere creates a tight seal with low operating torque, allowing the use of smaller actuators.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eInternal Surface Ra ≤ 0.8 µm:\u003c\/strong\u003e All internal body surfaces in contact with the fluid have a surface finish of Ra ≤ 0.8 µm—the maximum value defined by 3-A and EHEDG hygienic design standards for product-contact surfaces. Above Ra 0.8 µm, bacteria can adhere to surface micro-irregularities and form biofilm resistant to CIP cleaning.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFood-Grade Elastomers\u003c\/h3\u003e\n\n\u003ch4\u003eFood-Grade EPDM — The Standard\u003c\/h4\u003e\n\u003cp\u003e\n  \u003cstrong\u003eFood-grade EPDM\u003c\/strong\u003e is the correct elastomer for the vast majority of food and beverage applications. It is compatible with milk and dairy products, juices, fermented beverages, purified water, and standard CIP solutions (diluted NaOH, diluted HNO₃, chlorinated disinfectants). It resists SIP sterilization cycles with steam up to 134 °C.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -20 °C to +130 °C; SIP up to 134 °C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplies with:\u003c\/strong\u003e FDA 21 CFR—the elastomer compounds meet the applicable chapters of the U.S. Code of Federal Regulations for food contact\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Oils, high-concentration fats, hydrocarbons, high-concentration acids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFood-Grade \/ Pharmaceutical-Grade Silicone\u003c\/h4\u003e\n\u003cp\u003e\n  \u003cstrong\u003eFDA-grade silicone\u003c\/strong\u003e is the preferred elastomer in pharmaceutical, biotechnology, and high-purity food processing applications where higher certified biocompatibility is required. It offers greater flexibility than EPDM at low temperatures, excellent resistance to permanent compression (maintains its shape and seal over more cycles), and a wider temperature range.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -60 °C to +200 °C—the widest range among hygienic elastomers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplies with:\u003c\/strong\u003e FDA 21 CFR—same compliance as food-grade EPDM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMain applications:\u003c\/strong\u003e Cell culture media for bioreactors, injectable pharmaceuticals, WFI and pharmaceutical-grade purified water systems, biotechnology processes where minimal elastomer leaching is critical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLimitation:\u003c\/strong\u003e Lower resistance to concentrated NaOH and strong acids than EPDM—verify compatibility with specific CIP concentrations for the process\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCIP and SIP Compatibility\u003c\/h3\u003e\n\n\u003ch4\u003eCIP — Clean-in-Place\u003c\/h4\u003e\n\u003cp\u003e\n  The Cematic hygienic ball valve is compatible with standard CIP cycles in the food and pharmaceutical industries:\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial rinse with hot water (60–70 °C)\u003c\/li\u003e\n  \u003cli\u003eAlkaline cleaning with 1–3% NaOH at 70–80 °C\u003c\/li\u003e\n  \u003cli\u003eIntermediate rinse with water\u003c\/li\u003e\n  \u003cli\u003eAcid cleaning with 0.5–2% HNO₃ at 60–70 °C\u003c\/li\u003e\n  \u003cli\u003eFinal rinse with purified water\u003c\/li\u003e\n  \u003cli\u003eDisinfection with hydrogen peroxide solution or quaternary ammonium compounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n  Food-grade EPDM withstands this complete cycle for thousands of repetitions without significant degradation. The Ra ≤ 0.8 µm surface ensures that the CIP solution flow carries away all product residue without accumulation zones.\n\u003c\/p\u003e\n\n\u003ch4\u003eSIP — Sterilization-in-Place\u003c\/h4\u003e\n\u003cp\u003e\n  The Cematic hygienic ball valve resists standard SIP cycles in the pharmaceutical industry: saturated steam at 121–134 °C and 1.0–3.0 bar for 20–30 minutes. Food-grade EPDM maintains its sealing properties after thousands of SIP cycles under standard process conditions. In pharmaceutical systems with very frequent SIP cycles (several times per day for years), silicone may be preferable to EPDM due to its greater resistance to accumulated permanent compression.\n\u003c\/p\u003e\n\n\u003ch3\u003eDead-Space-Free Design\u003c\/h3\u003e\n\u003cp\u003e\n  The hygienic ball valve's design eliminates dead spaces—cavities where process or cleaning fluid can become stagnant, accumulate, and become a source of contamination or product degradation. The two design characteristics that ensure this are:\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eFull-port sphere:\u003c\/strong\u003e In the fully open position, the sphere's orifice is equal to the pipe's diameter—there is no side cavity where fluid can be trapped. The product and CIP solution flow through the same cylindrical channel without bifurcations or enlargements.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eRetention-free seats:\u003c\/strong\u003e PTFE seats are designed so that the cleaning fluid sweeps them completely—without gaps between the seat and the body where residual product could accumulate between batches.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e AISI 316L stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSphere:\u003c\/strong\u003e AISI 316L stainless steel, polished surface Ra ≤ 0.8 µm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Virgin PTFE—bidirectional tight shut-off\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStem packing:\u003c\/strong\u003e PTFE or EPDM depending on model\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGasket elastomer:\u003c\/strong\u003e Food-grade EPDM or FDA-grade silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Ra ≤ 0.8 µm on all product-contact surfaces; Ra ≤ 0.4 µm available upon request\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Tri-Clamp ISO 2852, True Union (American union) or butt weld BW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameters:\u003c\/strong\u003e DN15 (½\") to DN76.1 (3\") depending on connection type\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal pressure:\u003c\/strong\u003e Up to PN10 standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e -20 °C to +130 °C with EPDM; -60 °C to +180 °C with silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSIP:\u003c\/strong\u003e Up to 134 °C \/ 3 bar with both elastomers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort:\u003c\/strong\u003e Full—no obstruction to flow in open position\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Dead-space-free—compatible with verifiable CIP cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHygienic Ball Valve vs. Hygienic Butterfly Valve — When to Choose Each\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCriterion\u003c\/th\u003e\n      \u003cth\u003eSS316L Hygienic Ball Valve ⬅ This category\u003c\/th\u003e\n      \u003cth\u003eHygienic Butterfly Valve (Clamp)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTight shut-off\u003c\/td\u003e\n      \u003ctd\u003e✅ Total—no residual dripping between batches\u003c\/td\u003e\n      \u003ctd\u003eVery good—micro-leaks may occur long-term\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnobstructed passage\u003c\/td\u003e\n      \u003ctd\u003e✅ Sphere out of flow—completely free channel\u003c\/td\u003e\n      \u003ctd\u003eDisk always present in flow\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct shear sensitivity\u003c\/td\u003e\n      \u003ctd\u003e✅ Less shear—no disk in flow\u003c\/td\u003e\n      \u003ctd\u003eSlightly more shear due to disk\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFlow rate per diameter (Cv\/DN)\u003c\/td\u003e\n      \u003ctd\u003eLess than butterfly valve of same DN\u003c\/td\u003e\n      \u003ctd\u003e✅ Higher Cv—greater passage for same diameter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCost in DN50–DN100\u003c\/td\u003e\n      \u003ctd\u003eHigher\u003c\/td\u003e\n      \u003ctd\u003e✅ Lower in large diameters\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiameter range\u003c\/td\u003e\n      \u003ctd\u003eMainly DN15–DN76\u003c\/td\u003e\n      \u003ctd\u003e✅ DN25–DN150—wider range\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVertical installation without restriction\u003c\/td\u003e\n      \u003ctd\u003e✅ Any orientation\u003c\/td\u003e\n      \u003ctd\u003eVerify orientation according to model\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSampling and instrumentation points\u003c\/td\u003e\n      \u003ctd\u003e✅ First choice—guaranteed total closure\u003c\/td\u003e\n      \u003ctd\u003ePossible with adaptations\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHigh flow lines (DN100+)\u003c\/td\u003e\n      \u003ctd\u003e⚠️ High cost in DN100+\u003c\/td\u003e\n      \u003ctd\u003e✅ First economic choice\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain use\u003c\/td\u003e\n      \u003ctd\u003eSampling, dosing, instrumentation, precise isolation\u003c\/td\u003e\n      \u003ctd\u003eProduct distribution, high-flow CIP, transfer\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNote on Available Technical Documentation\u003c\/h3\u003e\n\u003cp\u003e\n  Cematic supplies hygienic ball valves with the technical documentation available from our manufacturers: SS316L material certificate with verified chemical composition, elastomer technical sheet with reference to FDA 21 CFR (applicable chapters), and surface finish data Ra ≤ 0.8 µm. For projects requiring formal product certification with a 3-A, EHEDG, or equivalent body certificate number, we transparently inform about the available documentation in each case—not all applications require formal third-party certification, and for many validation projects in the food and pharmaceutical industry, manufacturer documentation is sufficient. We consult on a case-by-case basis without obligation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAutomation of the Hygienic Ball Valve\u003c\/h3\u003e\n\u003cp\u003e\n  The Cematic hygienic ball valve is directly compatible with quarter-turn pneumatic actuators via the standard ISO 5211 interface:\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSingle-acting NC pneumatic actuator:\u003c\/strong\u003e The most frequent configuration in food and pharmaceutical process lines. If air supply or control signal is lost, the valve closes by mechanical spring—interrupting product flow without the need for an electrical signal. Essential in precision dosing systems where automatic shut-off in case of failure prevents product spillage.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eDouble-acting pneumatic actuator:\u003c\/strong\u003e For high-cycle frequency points where a single-acting spring would fatigue—automated CIP sequences with frequent opening and closing, filling control valves in high-speed fillers.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eActuator materials in hygienic zone:\u003c\/strong\u003e Actuators in food and beverage production areas must have a gravity drainage design—without upper cavities where cleaning water can accumulate. Specify actuators with a minimum IP67 rating and a design suitable for frequent washing when installation is in a wet process area.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMain Industries and Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eDairy industry:\u003c\/strong\u003e Sampling valves in pasteurized milk lines, isolation of measurement instruments (temperature, pH, density sensors), connections for individual equipment for maintenance, purge valves for low points in milk and cream distribution circuits.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eBeer and fermented beverages:\u003c\/strong\u003e Sampling points in fermenters and maturation tanks, service valves in filtered and carbonated beer lines, isolation of process control instrumentation (densimeters, dissolved CO₂ meters).\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eJuices, nectars, and beverages:\u003c\/strong\u003e Isolation valves for concentrate dispensers, sampling points in mixing and pasteurization lines, isolation of flow meters and Brix sensors.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003ePharmaceutical industry—purified water and WFI:\u003c\/strong\u003e Individual use points in purified water (PW) and water for injection (WFI) distribution loops. The weldable hygienic ball valve is the standard component for these points in pharmaceutical installations—total closure prevents loop contamination from the point of use. Isolation valves for instrumentation (conductivity, TOC, temperature sensors) in pharmaceutical water systems.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eBiotechnology and bioreactors:\u003c\/strong\u003e Aseptic sampling valves in cell culture bioreactors, addition points for media and pH control reagents (NaOH, HCl), inoculation and harvest valves. The hygienic ball valve with FDA silicone is the standard component in these applications due to silicone's greater biocompatibility with live culture media.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eCosmetics and personal care:\u003c\/strong\u003e Service valves in cream, lotion, and gel lines in plants operating under cosmetic GMP or ISO 22716. The ball valve's total closure prevents product dripping between batches of different color or formulation that would contaminate the subsequent batch.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Cematic for your sanitary ball valves?\u003c\/h3\u003e\n\u003cp\u003e\n  We have stock available in Mexico City for the most common clamp diameters: DN25 (1\"), DN38 (1½\") and DN51 (2\") with food-grade EPDM. We supply with SS316L material certificates and elastomer data sheets with reference to FDA 21 CFR. We advise on the selection of EPDM vs. silicone based on the specific fluid and the frequency of CIP\/SIP cycles in the process, and on the decision between clamp, True Union, and weldable depending on the level of microbiological criticality of the installation. For pharmaceutical projects with validation requirements, we transparently inform about available documentation and its limitations. Quotes on the same business day. Shipping throughout the Mexican Republic. Contact us via WhatsApp or at ventas@cematic.com.\n\u003c\/p\u003e","products":[{"product_id":"valvula-de-bola-clamp-higienica","title":"Clamp Ball Valve | Hygienic | Stainless steel","description":"\u003ch2\u003eSanitary Clamp Ball Valve in 316L Stainless Steel — PTFE \/ TFM1600, ISO5211\u003c\/h2\u003e\n\u003cp\u003eCematic's \u003cstrong\u003esanitary clamp ball valve\u003c\/strong\u003e is the standard fluid control component in sanitary industries that require full bore, tight shut-off, and quick disassembly. It is made of 316L or 304 stainless steel, offering superior corrosion resistance and long service life.\u003c\/p\u003e\n\u003cp\u003eAdditionally, its clamp-type connection allows for installation and disassembly without welding or threading, making maintenance and cleaning much simpler.\u003c\/p\u003e\n\u003cp\u003eThe ball mechanism operates with a 90° turn. Its full-bore design also ensures unrestricted flow without significant pressure drops. Consequently, it is the right choice for processes requiring quick opening and closing with minimal head loss.\u003c\/p\u003e\n\u003cp\u003eIt is also available with a manual lever, pneumatic actuator, or electric actuator, adapting to manual or fully automated processes.\u003c\/p\u003e\n\u003ch3\u003eOperating Principle — Sanitary Clamp Ball Valve\u003c\/h3\u003e\n\u003cp\u003eThe ball rotates 90° between the fully open and fully closed positions. In the open position, the ball's bore aligns with the pipe, allowing fluid to flow without obstruction. In the closed position, however, the ball rotates 90° and completely blocks the fluid passage. This ensures a tight seal that does not depend on differential pressure to seal.\u003c\/p\u003e\n\u003cp\u003eIts smooth interior also prevents residue accumulation between operating cycles. Consequently, it guarantees fluid purity and facilitates CIP cleaning without needing to disassemble the valve in each cycle.\u003c\/p\u003e\n\u003ch3\u003eBody Materials — SS316L or SS304\u003c\/h3\u003e\n\u003cp\u003e316L stainless steel contains molybdenum in its composition, offering greater corrosion resistance in chemical and chloride environments. It is also the preferred material in demanding pharmaceutical and food applications where SS304 may show pitting.\u003c\/p\u003e\n\u003cp\u003e304 stainless steel, on the other hand, is versatile and resistant in moderate conditions. Its smooth surface facilitates cleaning and is therefore suitable for industrial and process applications where chemical aggressiveness is lower. Both options, finally, have an internal finish of Ra ≤ 0.8 µm, which is the surface standard in certified hygienic applications.\u003c\/p\u003e\n\u003ch3\u003eSeat Materials — PTFE or TFM1600\u003c\/h3\u003e\n\u003cp\u003ePTFE Teflon is chemically inert to most fluids. In addition, its low coefficient of friction improves valve performance, making it ideal for environments with aggressive or corrosive fluids.\u003c\/p\u003e\n\u003cp\u003eTFM1600, however, has similar properties to PTFE but with significant improvements. Firstly, it offers greater mechanical and abrasion resistance. It also maintains stable properties at high service temperatures, making it the right choice for processes with frequent thermal cycles.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eParameter\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\n\u003ctd\u003e316L or 304 Stainless Steel\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAvailable Seats\u003c\/td\u003e\n\n\u003ctd\u003ePTFE (Teflon) or TFM1600\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003eClamp Type\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eActuator Mounting\u003c\/td\u003e\n\n\u003ctd\u003eISO5211\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking Pressure\u003c\/td\u003e\n\n\u003ctd\u003e1000 psi (≤ 38 °C \/ 100 °F)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMinimum Temperature\u003c\/td\u003e\n\n\u003ctd\u003e-20 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\n\u003ctd\u003e180 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInternal Finish\u003c\/td\u003e\n\n\u003ctd\u003eRa ≤ 0.8 µm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAvailable Diameters\u003c\/td\u003e\n\n\u003ctd\u003e1\/2\", 3\/4\", 1\", 1½\", 2\", 2½\", 3\", 4\"\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePneumatic Actuator\u003c\/td\u003e\n\n\u003ctd\u003eSingle or Double Acting\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eElectric Actuator\u003c\/td\u003e\n\n\u003ctd\u003eOn-Off or Modulating\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBase SKU\u003c\/td\u003e\n\n\u003ctd\u003ePBC02\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eOperation Options\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003esanitary clamp ball valve\u003c\/strong\u003e is available in three operating modes depending on the required level of automation. The manual lever is the standard option, requiring no electrical or pneumatic power to operate.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003epneumatic actuator\u003c\/strong\u003e, on the other hand, automates opening and closing using compressed air. The \u003cstrong\u003eOn-Off or modulating electric actuator\u003c\/strong\u003e is for processes where proportional position control is necessary.\u003c\/p\u003e\n\u003cp\u003eThis allows the valve to be integrated into control systems with PLCs. All options are also delivered assembled and tested, ready for installation.\u003c\/p\u003e\n\u003ch3\u003eFluid Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis \u003cstrong\u003esanitary clamp ball valve\u003c\/strong\u003e is compatible with a wide range of fluids in the sanitary and industrial sectors. The main groups are described below:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePurified Water and Water for Injection\u003c\/strong\u003e — SS316L does not release metal ions into the fluid; therefore, it is the standard material in high-purity pharmaceutical lines.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFood Fluids — dairy, juices, beer, vegetable oils\u003c\/strong\u003e — SS316L and PTFE\/TFM1600 seats meet food contact requirements; likewise, the Ra ≤ 0.8 µm finish prevents residue retention.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCIP Agents — caustic soda, nitric acid, peracetic acid\u003c\/strong\u003e — PTFE and TFM1600 are inert to CIP cleaning agents; furthermore, SS316L resists typical concentrations without corrosion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eChemical and Corrosive Fluids\u003c\/strong\u003e — PTFE is inert to most acids, bases, and solvents; however, for extremely aggressive fluids, verify compatibility with Cematic's technical team.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHydrocarbons and Solvents — petrochemical industry\u003c\/strong\u003e — TFM1600 resists wear from hydrocarbons; in contrast, standard PTFE may deform in high-pressure and temperature cycles.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eApplications of the Sanitary Clamp Ball Valve\u003c\/h3\u003e\n\u003ch4\u003eFood and Beverage Industry\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003esanitary clamp ball valve\u003c\/strong\u003e controls the flow of liquids in food and beverage production lines. Its full-bore design prevents residue accumulation, making it the preferred component in plants with food safety certification. Additionally, it resists the acids and alkalis of CIP cleaning agents, ensuring hygiene between production batches.\u003c\/p\u003e\n\u003ch4\u003ePharmaceutical Industry\u003c\/h4\u003e\n\u003cp\u003eIn processes where sterility is essential, SS316L also withstands aggressive cleaning agents without corrosion, thus guaranteeing product integrity in each production cycle. Additionally, the ISO5211 mounting allows for valve automation with pneumatic actuators for integration into pharmaceutical process control systems.\u003c\/p\u003e\n\u003ch4\u003eChemical Industry\u003c\/h4\u003e\n\u003cp\u003eThe PTFE or TFM1600 seat, therefore, resists a wide range of chemicals, acids, and bases. Consequently, it extends the valve's service life in aggressive environments where conventional elastomers would prematurely fail. Furthermore, the ball closure is hermetic from the first operation, which is critical in handling toxic or corrosive fluids.\u003c\/p\u003e\n\u003ch4\u003ePetrochemical Industry\u003c\/h4\u003e\n\u003cp\u003eThis valve also withstands demanding operating conditions in refineries and process plants. The TFM1600, moreover, resists wear caused by hydrocarbons and solvents superior to standard PTFE. Therefore, it is the right choice in petrochemical applications with frequent opening and closing cycles at high pressure.\u003c\/p\u003e\n\u003ch4\u003eIndustrial Processes and Manufacturing\u003c\/h4\u003e\n\u003cp\u003eIn industrial piping systems, this valve regulates flow with mechanical resistance for continuous operation. Its performance is also reliable in continuous production cycles. Its ISO5211 mounting also facilitates automation with pneumatic or electric actuators without replacing the valve. Consequently, it is an investment that protects process continuity against changes in the plant's automation level.\u003c\/p\u003e\n\u003cp\u003eIn summary, Cematic's \u003cstrong\u003esanitary clamp ball valve\u003c\/strong\u003e combines hygiene, durability, and versatility. It is, therefore, the most reliable choice for sanitary and chemically demanding industrial processes.\u003c\/p\u003e\n\u003cp\u003eFor the complete range of sanitary valves, see \u003ca href=\"https:\/\/cematic.com.mx\/collections\/valvulas-higienicas\"\u003esanitary valves collection →\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-de-bola-clamp-acero-inoxidable-316l-asiento-tfm1600-pbc01.pdf?v=1776282786\" title=\"Ficha Técnica Válvula de Bola Clamp Acero Inoxidable 316L Asiento TFM1600\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003eTFM1600 Seat Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca rel=\"noopener\" title=\"Ficha Técnica Válvula de Bola Clamp Acero Inoxidable 316L Asiento PTFE\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-de-bola-clamp-acero-inoxidable-316l-asiento-de-teflon-pbc02.pdf?v=1776282815\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan\u003ePTFE Seat Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca rel=\"noopener\" title=\"ficha-técnica-de-valvula-de-bola-clamp-acero-inoxidable-304-cematic\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-de-bola-clamp-acero-inoxidable-304-pbc11.pdf?v=1776282833\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan style=\"color: #b71a1a;\"\u003e\u003cspan\u003eSS304 Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Cematic","offers":[{"title":"1\/2\" \/ PTFE \/ SS316L","offer_id":49708529090873,"sku":"PBC0202","price":1174.41,"currency_code":"MXN","in_stock":true},{"title":"1\/2\" \/ TFM1600","offer_id":41298280382644,"sku":"PBC0102","price":2548.29,"currency_code":"MXN","in_stock":false},{"title":"3\/4\" \/ PTFE \/ SS316L","offer_id":49708529123641,"sku":"PBC0204","price":1225.73,"currency_code":"MXN","in_stock":true},{"title":"3\/4\" \/ TFM1600","offer_id":41298268553396,"sku":"PBC0104","price":2817.97,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ PTFE \/ SS316L","offer_id":49708529156409,"sku":"PBC0206","price":2361.65,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ PTFE \/ SS304","offer_id":49708795789625,"sku":"PBC1106","price":3210.17,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ TFM1600 \/ SS316L","offer_id":41298268586164,"sku":"PBC0106","price":3405.02,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ PTFE \/ SS316L","offer_id":49708529189177,"sku":"PBC0208","price":3893.6,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ PTFE \/ SS304","offer_id":49708795822393,"sku":"PBC1108","price":5817.3,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ TFM1600 \/ SS316L","offer_id":41298268618932,"sku":"PBC0108","price":8725.36,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ PTFE \/ SS316L","offer_id":49708529221945,"sku":"PBC0210","price":4979.05,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ PTFE \/ SS304","offer_id":49708795855161,"sku":"PBC1110","price":8412.47,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ TFM1600 \/ SS316L","offer_id":41298268651700,"sku":"PBC0110","price":4079.73,"currency_code":"MXN","in_stock":true},{"title":"2 1\/2\" \/ PTFE \/ SS316L","offer_id":49708529287481,"sku":"PBC0212","price":7621.26,"currency_code":"MXN","in_stock":true},{"title":"2 1\/2\" \/ TFM1600 \/ SS316L","offer_id":49708529254713,"sku":null,"price":0.0,"currency_code":"MXN","in_stock":false},{"title":"3\" \/ PTFE \/ SS316L","offer_id":49708529320249,"sku":"PBC0214","price":12383.9,"currency_code":"MXN","in_stock":true},{"title":"3\" \/ TFM1600","offer_id":41298280415412,"sku":"PBC0114","price":31773.54,"currency_code":"MXN","in_stock":true},{"title":"4\" \/ PTFE \/ SS316L","offer_id":49708529353017,"sku":"PBC0216","price":18511.7,"currency_code":"MXN","in_stock":true},{"title":"4\" \/ TFM1600","offer_id":41298280448180,"sku":"PBC0116","price":36767.48,"currency_code":"MXN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/V_lvula_de_bola_clamp_higi_nica_acero_inoxidable_316L_con_manija.jpg?v=1774378355"},{"product_id":"valvula-de-bola-higienica-soldable","title":"Weldable Hygienic Ball Valve S.W. 316L stainless steel","description":"\u003ch2\u003eWeldable Hygienic Ball Valve in 316L Stainless Steel — Cavity Filled, PTFE \/ TFM1600\u003c\/h2\u003e\n\u003cp\u003eCematic's \u003cstrong\u003eweldable hygienic ball valve\u003c\/strong\u003e in 316L stainless steel is the fluid control component for permanent sanitary installations where a butt-welded connection ensures maximum circuit integrity. Unlike the version with a clamp connection, this valve is welded directly to the process piping.\u003c\/p\u003e\n\u003cp\u003eThis eliminates all mechanical joint points that could be sources of leakage or contamination. Its cavity-filled design also eliminates dead spaces between the ball and the body, making it the right choice for high-purity applications where product retention in internal cavities is unacceptable.\u003c\/p\u003e\n\u003cp\u003eIt is also available with a PTFE or TFM1600 seat depending on the chemical and mechanical resistance requirements of the process. In addition, its ISO5211 mounting allows pneumatic or electric actuators to be installed without replacing the valve, thereby protecting the investment against changes in the plant's automation level.\u003c\/p\u003e\n\u003ch3\u003eOperating Principle — Weldable Hygienic Ball Valve\u003c\/h3\u003e\n\u003cp\u003eThe ball rotates 90° between the fully open and fully closed positions. In the open position, the ball bore is aligned with the piping, allowing fluid to flow without obstruction or significant pressure drops.\u003c\/p\u003e\n\u003cp\u003eIn the closed position, however, the ball rotates 90° and completely blocks the fluid passage. This ensures a tight seal, independent of differential pressure.\u003c\/p\u003e\n\u003cp\u003eThe cavity-filled design is also the key differentiator from conventional ball valves. In a standard valve, there are spaces between the ball and the body that retain product between cycles. The cavity-filled design eliminates these spaces, meaning fluid is not trapped, and effective CIP cleaning can be achieved without disassembling the valve.\u003c\/p\u003e\n\u003ch3\u003eWeldable vs. Clamp Connection — When to choose each option\u003c\/h3\u003e\n\u003cp\u003eThe choice between a weldable and a clamp connection depends on the type of installation and the operational requirements of the process. The weldable connection is the correct choice in the following cases:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePermanent high-purity installations:\u003c\/strong\u003e The welded joint has no external gaskets or retention cavities, making it the preferred type of connection in aseptic systems where external contamination is unacceptable.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReduced leak points:\u003c\/strong\u003e In circuits with many valves, welding eliminates mechanical joints. This reduces the total number of potential leak points in the installation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHigh-pressure systems:\u003c\/strong\u003e The welded joint also withstands higher pressures than the clamp connection. It does not rely on mechanical tightening of the clamp to maintain the seal.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe clamp connection, on the other hand, is suitable when the valve needs to be frequently disassembled for inspection or maintenance. For this application, see the \u003ca href=\"https:\/\/cematic.com.mx\/products\/valula-bola-clamp-higienica\"\u003ehygienic ball valve with clamp connection →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eConstruction Materials\u003c\/h3\u003e\n\u003cp\u003eThe body is made of 316L stainless steel, which is the standard material in demanding hygienic applications, as its molybdenum content offers greater resistance to chlorides and cleaning agents than SS304. The ball is also made of SS316L, maintaining material consistency throughout the fluid contact area.\u003c\/p\u003e\n\u003cp\u003eThe internal finish Ra ≤ 0.8 µm eliminates surface roughness that could retain product or microorganisms. Finally, the ISO5211 mounting is integrated into the body, allowing the valve to be automated with any compatible quarter-turn actuator.\u003c\/p\u003e\n\u003ch3\u003eAvailable Seats — PTFE or TFM1600\u003c\/h3\u003e\n\u003cp\u003ePTFE Teflon is chemically inert to most fluids, making it ideal for environments with aggressive or corrosive fluids. Its low coefficient of friction also improves valve performance in frequent opening and closing cycles.\u003c\/p\u003e\n\u003cp\u003eTFM1600, on the other hand, has similar properties to PTFE but with significant improvements in mechanical and abrasion resistance. It also maintains its stable properties at higher temperatures than conventional PTFE, making it the correct choice for processes with frequent thermal cycles or high pressures.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eParameter\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBody and ball material\u003c\/td\u003e\n\n\u003ctd\u003e316L Stainless Steel (SS316L)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAvailable seats\u003c\/td\u003e\n\n\u003ctd\u003ePTFE (Teflon) or TFM1600\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003eButt Weld (S.W.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDesign\u003c\/td\u003e\n\n\u003ctd\u003eCavity Filled (no dead spaces)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eActuator mounting\u003c\/td\u003e\n\n\u003ctd\u003eISO5211\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaximum working pressure\u003c\/td\u003e\n\n\u003ctd\u003e1000 psi (PN63)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMinimum temperature\u003c\/td\u003e\n\n\u003ctd\u003e-20 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaximum temperature\u003c\/td\u003e\n\n\u003ctd\u003e180 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInternal finish\u003c\/td\u003e\n\n\u003ctd\u003eRa ≤ 0.8 µm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperation\u003c\/td\u003e\n\n\u003ctd\u003eManual (lever), pneumatic or electric actuator\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eOperation Options\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eweldable hygienic ball valve\u003c\/strong\u003e is available in three operation modes. The manual lever is the standard option, requiring no electrical or pneumatic power. The pneumatic actuator, however, automates opening and closing using compressed air.\u003c\/p\u003e\n\u003cp\u003eThis allows the valve to be integrated into PLC control systems. Finally, the On-Off or modulating electric actuator is for processes where proportional position control is necessary. All options are supplied assembled and tested, ready for installation.\u003c\/p\u003e\n\u003ch3\u003eFluid Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis \u003cstrong\u003eweldable hygienic ball valve\u003c\/strong\u003e is compatible with a wide range of fluids in the sanitary and industrial sectors. The main groups are described below:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePurified water and water for injection (WFI)\u003c\/strong\u003e — SS316L does not contribute metallic ions; therefore, it is the standard material in high-purity pharmaceutical and biotechnological lines.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFood fluids — dairy products, juices, beer, vegetable oils\u003c\/strong\u003e — SS316L and PTFE\/TFM1600 seats comply with food contact requirements; also, the Ra ≤ 0.8 µm finish prevents residue retention between batches.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClean steam and hot water up to 180 °C\u003c\/strong\u003e — the welded connection eliminates leak points that exist in clamp joints at SIP sterilization temperatures; in addition, SS316L resists condensate without corrosion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCIP agents — caustic soda, nitric acid, peracetic acid\u003c\/strong\u003e — PTFE and TFM1600 are inert to CIP cleaning agents; however, verify concentration and temperature with Cematic's technical team for extreme conditions.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCorrosive chemical fluids\u003c\/strong\u003e — PTFE is inert to most acids, bases, and solvents; for extremely aggressive fluids, TFM1600 offers greater mechanical and abrasion resistance.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eApplications of the weldable hygienic ball valve\u003c\/h3\u003e\n\u003ch4\u003ePharmaceutical and Biotechnology Industry\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eweldable hygienic ball valve\u003c\/strong\u003e is the standard component in aseptic lines for pharmaceutical and biotechnological production. The welded connection eliminates mechanical joints, thereby reducing microbiological risk points in the circuit. In addition, the cavity-filled design ensures no product residue remains between cycles, which is a requirement in validated GMP processes.\u003c\/p\u003e\n\u003ch4\u003eFood and Beverage Industry\u003c\/h4\u003e\n\u003cp\u003eIn food and beverage production lines, this valve controls the flow of dairy products, juices, beers, and oils with total hygienic integrity. The welded connection is also the standard for installation in these lines.\u003c\/p\u003e\n\u003cp\u003eSS316L and PTFE\/TFM1600 seats also comply with food contact requirements. Additionally, effective CIP cleaning is achieved without disassembling the valve thanks to the cavity-filled design.\u003c\/p\u003e\n\u003ch4\u003eHigh-Temperature CIP and SIP Systems\u003c\/h4\u003e\n\u003cp\u003eIn automated cleaning and sterilization systems, this valve also withstands the aggressive conditions of CIP\/SIP cycles. The welded connection does not exhibit gasket deterioration that occurs in clamp connections after many temperature cycles. Consequently, it is the most durable option in installations with frequent CIP\/SIP cycles.\u003c\/p\u003e\n\u003ch4\u003eHigh-Purity Chemical Industry\u003c\/h4\u003e\n\u003cp\u003eIn chemical process plants, the cavity-filled design of SS316L with a PTFE or TFM1600 seat meets purity requirements. Therefore, it is the correct component when the fluid requires inert materials and no dead spaces.\u003c\/p\u003e\n\u003cp\u003eThis makes it the correct component in high-purity chemical installations where conventional valves generate contamination due to fluid retention in internal cavities.\u003c\/p\u003e\n\u003cp\u003eFor the complete range of hygienic valves, see \u003ca href=\"https:\/\/cematic.com.mx\/collections\/valvulas-higienicas\"\u003ehygienic valves collection →\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca rel=\"noopener\" title=\"Technical Data Sheet Weldable Hygienic Ball Valve in 316L Stainless Steel Cematic\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-de-bola-higienica-soldable-acero-inoxidable-316l-pbb01.pdf?v=1776283440\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #8f1616;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003cspan\u003eTFM1600 Seat Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-de-bola-higienica-ptfe-soldable-acero-inoxidable-316l-pbs02.pdf?v=1776283424\" title=\"Technical Data Sheet Weldable Hygienic Ball Valve in 316L Stainless Steel PTFE Seat Cematic\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #8f1616;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003cspan\u003ePTFE Seat Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Cematic","offers":[{"title":"1\/2\" \/ PTFE","offer_id":49708691521849,"sku":"PBS0202","price":1171.16,"currency_code":"MXN","in_stock":true},{"title":"3\/4\" \/ PTFE","offer_id":49708691554617,"sku":"PBS0204","price":1223.25,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ TFM1600","offer_id":49563039826233,"sku":"PBB0106","price":11452.03,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ PTFE","offer_id":49708691587385,"sku":"PBS0206","price":2355.79,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ TFM1600","offer_id":41302668083380,"sku":"PBB0108","price":11452.03,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ PTFE","offer_id":49708691620153,"sku":"PBS0208","price":3891.59,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ PTFE","offer_id":49708691652921,"sku":"PBS0210","price":4998.08,"currency_code":"MXN","in_stock":true},{"title":"2 1\/2\" \/ PTFE","offer_id":49708691685689,"sku":"PBS0212","price":7666.42,"currency_code":"MXN","in_stock":true},{"title":"3\" \/ PTFE","offer_id":49708691718457,"sku":"PBS0214","price":12521.7,"currency_code":"MXN","in_stock":true},{"title":"4\" \/ PTFE","offer_id":49708691751225,"sku":"PBS0216","price":18743.93,"currency_code":"MXN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-bola-higienica-soldable-316l-con-manija.jpg?v=1764025574"},{"product_id":"valvula-de-bola-3-vias-clamp-higienica-ss316l","title":"3-Way Clamp 3A Ball Valves Body SS316L","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eOur 3-Way L-Type Clamp 3A Ball Valves with SS316L Stainless Steel body and PTFE seat are designed to offer exceptional hygiene and flexibility in sanitary industrial applications. The SS316L Stainless Steel body provides excellent corrosion resistance and durability, while the PTFE seat ensures reliable sealing and resistance to high temperatures and chemicals. The 3-Way L-Type design allows for flexible flow direction, ideal for systems requiring precise and controlled flow distribution. Meeting 3A standards, these valves are perfect for the food, pharmaceutical and other sanitary applications that demand the highest quality and ease of cleaning.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Characteristics:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e 3 Way Body \u003c\/li\u003e\u003cli\u003e Clamp Port 3A\u003c\/li\u003e\u003cli\u003e SS316 L body\u003c\/li\u003e\u003cli\u003e Type: L, T\u003c\/li\u003e\u003cli\u003e Mounting for ISO 5211 actuator\u003cbr\u003e\u003c\/li\u003e\u003cli\u003e PTFE Seats and Seals\u003c\/li\u003e\u003cli\u003e Fully encapsulated\u003c\/li\u003e\u003cli\u003e Working Pressure: WP 1000 WOG (PN63)\u003c\/li\u003e\u003cli\u003e Working Temperature: -20ºC- 180ºC\u003c\/li\u003e\u003cli\u003e Explosion proof stem\u003c\/li\u003e\u003c\/ul\u003e\u003cp class=\"p1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/Valvula_de_Bola_Clamp_3A_-_3_Vias_Cuerpo_SS316L_-_PBTC.pdf?v=1723512602\" target=\"_blank\" title=\"Ficha Técnica Válvula de bola 3 Vías Puertos Clamp Higiénica\" rel=\"noopener\"\u003e Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Cematic","offers":[{"title":"1\/2\" \/ L","offer_id":49590803267897,"sku":"PBTC0102","price":7940.35,"currency_code":"MXN","in_stock":true},{"title":"1\/2\" \/ T","offer_id":49709153812793,"sku":"PBTC0202","price":7627.8,"currency_code":"MXN","in_stock":true},{"title":"3\/4\" \/ L","offer_id":49590803300665,"sku":"PBTC0104","price":5597.13,"currency_code":"MXN","in_stock":true},{"title":"3\/4\" \/ T","offer_id":49709153845561,"sku":"PBTC0204","price":5336.68,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ L","offer_id":49590803333433,"sku":"PBTC0106","price":7770.6,"currency_code":"MXN","in_stock":true},{"title":"1\" \/ T","offer_id":49709153878329,"sku":"PBTC0206","price":7445.48,"currency_code":"MXN","in_stock":true},{"title":"1 1\/2\" \/ L","offer_id":49590803366201,"sku":"PBTC0108","price":12000.79,"currency_code":"MXN","in_stock":false},{"title":"1 1\/2\" \/ T","offer_id":49709153911097,"sku":"PBTC0208","price":11480.77,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ L","offer_id":49590803398969,"sku":"PBTC0110","price":15684.91,"currency_code":"MXN","in_stock":true},{"title":"2\" \/ T","offer_id":49709153943865,"sku":"PBTC0210","price":15203.51,"currency_code":"MXN","in_stock":true},{"title":"2 1\/2\" \/ L","offer_id":49590803431737,"sku":"PBTC0112","price":26188.51,"currency_code":"MXN","in_stock":false},{"title":"2 1\/2\" \/ T","offer_id":49709153976633,"sku":"PBTC0212","price":35372.77,"currency_code":"MXN","in_stock":false},{"title":"3\" \/ L","offer_id":49590803464505,"sku":"PBTC0114","price":42537.14,"currency_code":"MXN","in_stock":true},{"title":"3\" \/ T","offer_id":49709154009401,"sku":"PBTC0214","price":38502.75,"currency_code":"MXN","in_stock":true},{"title":"4\" \/ L","offer_id":49590803497273,"sku":"PBTC0116","price":103089.83,"currency_code":"MXN","in_stock":true},{"title":"4\" \/ T","offer_id":49709154042169,"sku":"PBTC0216","price":100746.61,"currency_code":"MXN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/valvula-bola-3-vias-iso5211-inoxidable-manija.jpg?v=1763758926"},{"product_id":"accesorios-clamp-sanitarios-acero-inoxidable","title":"Sanitary Clamp Fittings in 316L Stainless Steel | Clamp, End Cap, Gasket","description":"\u003ch2\u003e316L Stainless Steel Sanitary Clamp Fittings — Easy-to-Disassemble Hygienic Connections\u003c\/h2\u003e\n\u003cp\u003eCematic's 316L stainless steel \u003cstrong\u003esanitary clamp fittings\u003c\/strong\u003e ensure tight, secure, and easy-to-disassemble connections in hygienic piping systems. Unlike threaded or flanged connections, the clamp seals with a single quick-release clamp.\u003c\/p\u003e\n\u003cp\u003eThis allows any element of the line to be disassembled in seconds without special tools. Their manufacture in SS316L also gives them superior corrosion resistance, making them the right choice for process lines where hygiene and durability cannot be compromised.\u003c\/p\u003e\n\u003ch3\u003eSanitary Clamp Fittings available from Cematic\u003c\/h3\u003e\n\u003cp\u003eCematic's catalog of \u003cstrong\u003esanitary clamp fittings\u003c\/strong\u003e covers the four essential components to complete any installation with a clamp connection:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClamp:\u003c\/strong\u003e Fastening element that joins and seals two clamp pieces together. Its lever or screw design also allows the connection to be installed or released in seconds without special tools.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClamp cap (blind plug):\u003c\/strong\u003e Closes open ends of pipes or valves during maintenance or process changes. Therefore, it is the correct accessory to isolate a point in the line without modifying the piping or installing an additional valve.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClamp connection (ferrule):\u003c\/strong\u003e Joins two sections of pipe or connects a valve to the line, ensuring a tight seal when the clamp is tightened. It is also available in different configurations — straight, elbow, tee, reducer — to cover any installation design.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClamp gasket:\u003c\/strong\u003e Rubber seal that prevents leaks between two clamp pieces joined by the clamp. Available in EPDM for water, steam, and standard CIP agents, or in silicone for fluids requiring higher temperature resistance or food contact approval. It is, therefore, the most worn component and the most important in the preventive maintenance of the system.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFluid and application compatibility\u003c\/h3\u003e\n\u003cp\u003eThese SS316L \u003cstrong\u003esanitary clamp fittings\u003c\/strong\u003e are compatible with purified water, clean steam, food fluids, CIP agents, and pharmaceutical fluids. Therefore, they are standard components in the food, pharmaceutical, biotechnology, and cosmetic industries where the clamp connection is the established joining system.\u003c\/p\u003e\n\u003cp\u003eThey are also commonly consumed components in preventive maintenance — especially gaskets — so maintaining a stock of spare parts guarantees the operational continuity of the system.\u003c\/p\u003e\n\u003cp\u003eFor the complete range of hygienic valves and accessories, see \u003ca href=\"https:\/\/cematic.com.mx\/collections\/valvulas-higienicas\"\u003ehygienic valves collection →\u003c\/a\u003e\u003c\/p\u003e","brand":"Cematic","offers":[{"title":"Clamp \/ 1\/2\"","offer_id":50587201438009,"sku":"PCSA0104","price":131.81,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 3\/4\"","offer_id":50587201470777,"sku":"PCSA0105","price":131.81,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 1\"","offer_id":50587201503545,"sku":"PCSA0106","price":219.69,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 1 1\/2\"","offer_id":50587201536313,"sku":"PCSA0108","price":219.69,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 2\"","offer_id":50587201569081,"sku":"PCSA0110","price":246.59,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 2 1\/2\"","offer_id":50587201601849,"sku":"PCSA0112","price":298.6,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 3\"","offer_id":50587201634617,"sku":"PCSA0114","price":334.47,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 4\"","offer_id":50587201667385,"sku":"PCSA0116","price":422.35,"currency_code":"MXN","in_stock":true},{"title":"Clamp \/ 6\"","offer_id":50587201700153,"sku":"PCSA0118","price":830.34,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 1\/2\"","offer_id":50587201732921,"sku":"PCST0104","price":66.36,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 3\/4\"","offer_id":50587201765689,"sku":"PCST0105","price":66.36,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 1\"","offer_id":50587201798457,"sku":"PCST0106","price":72.63,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 1 1\/2\"","offer_id":50587201831225,"sku":"PCST0108","price":72.63,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 2\"","offer_id":50587201863993,"sku":"PCST0110","price":105.81,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 2 1\/2\"","offer_id":50587201896761,"sku":"PCST0112","price":151.54,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 3\"","offer_id":50587201929529,"sku":"PCST0114","price":191.0,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 4\"","offer_id":50587201962297,"sku":"PCST0116","price":372.13,"currency_code":"MXN","in_stock":true},{"title":"Clamp Cover \/ 6\"","offer_id":50587201995065,"sku":"PCST0118","price":1143.29,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 1\/2\"","offer_id":50587202027833,"sku":"PCSF0104","price":66.36,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 3\/4\"","offer_id":50587202060601,"sku":"PCSF0105","price":66.36,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 1\"","offer_id":50587202093369,"sku":"PCSF0106","price":72.63,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 1 1\/2\"","offer_id":50587202126137,"sku":"PCSF0108","price":68.15,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 2\"","offer_id":50587202158905,"sku":"PCSF0110","price":78.91,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 2 1\/2\"","offer_id":50587202191673,"sku":"PCSF0112","price":98.64,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 3\"","offer_id":50587202224441,"sku":"PCSF0114","price":118.36,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 4\"","offer_id":50587202257209,"sku":"PCSF0116","price":174.86,"currency_code":"MXN","in_stock":true},{"title":"Connection \/ 6\"","offer_id":50587202289977,"sku":"PCSF0118","price":461.8,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 1\/2\"","offer_id":50594180530489,"sku":"PCSG0104","price":5.38,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 3\/4\"","offer_id":50594180563257,"sku":"PCSG0105","price":5.38,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 1\"","offer_id":50594180596025,"sku":"PCSG0106","price":11.66,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 1 1\/2\"","offer_id":50594180628793,"sku":"PCSG0108","price":10.76,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 2\"","offer_id":50594180661561,"sku":"PCSG0110","price":11.66,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 2 1\/2\"","offer_id":50594180694329,"sku":"PCSG0112","price":16.14,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 3\"","offer_id":50594180727097,"sku":"PCSG0114","price":21.52,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 4\"","offer_id":50594180759865,"sku":"PCSG0116","price":26.0,"currency_code":"MXN","in_stock":true},{"title":"Packaging \/ 6\"","offer_id":50594180792633,"sku":"PCSG0118","price":61.0,"currency_code":"MXN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/files\/abrazadera-un-solo-pasador-tipo-pesado-tuerca-redonda-3-pulgadas.jpg?v=1755097635"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/3917\/1508\/collections\/VALVULA_BOLA_3_VIAS_8419.jpg?v=1772747671","url":"https:\/\/cematic.com\/collections\/valvulas-bola-higienica.oembed","provider":"Cematic","version":"1.0","type":"link"}