SIPART PS2 SIEMENS electropneumatic positioner body Polycarbonate Simple Action.
Pickup availability could not be loaded
SIEMENS SIPART PS2 Single-Acting Electropneumatic Positioner — Polycarbonate, IP66/NEMA 4X, 4-20 mA, -30°C to 80°C
The SIEMENS SIPART PS2 single-acting electropneumatic positioner is the industry-standard intelligent positioner in the process industry worldwide. Unlike generic positioners on the market, the SIPART PS2 is backed by Siemens' technology platform and global support, therefore guaranteeing the availability of spare parts, firmware updates, and long-term technical support.
The polycarbonate body with IP66 protection and NEMA 4X certification makes it suitable for outdoor and indoor installations exposed to rain, dust, and moisture. Its operating temperature range of -30°C to 80°C also exceeds the range of most positioners in the catalog, as it covers both extremely cold climates and high-temperature industrial environments.
Why the SIPART PS2 is the standard specification in plants with Siemens DCS systems
The SIPART PS2 is the reference positioner in facilities using Siemens control systems — SIMATIC PCS 7, SIMATIC S7, and others — because the integration between the positioner and the control system from the same manufacturer is optimized. The advantages of this integration are described below, as they are relevant to the engineer specifying the positioner:
- Native integration with Siemens DCS and PLC — since parameterization is performed from the same engineering environment: The SIPART PS2 integrates directly with SIMATIC PCS 7 and Step 7 without converters or additional configurations. Consequently, the instrumentation technician can configure, calibrate, and diagnose the positioner from the same engineering tool they use for the rest of the plant's instrumentation.
- Long-term technical support and spare parts — since Siemens guarantees parts availability for decades: The SIPART PS2 is a Siemens product with a long life cycle and documented support. Unlike generic positioners, Siemens maintains the availability of spare parts and updates even if the product has been installed for years. Consequently, the instrument's total cost of ownership is lower in the long term.
- Compatibility with industry-standard communication protocols — for integration with any DCS brand: The SIPART PS2 is compatible with the standard 4-20 mA analog signal and also integrates with DCS and PLC systems from any manufacturer — Emerson, Honeywell, ABB, Yokogawa — without protocol restrictions.
Polycarbonate and IP66/NEMA 4X — when this body is the correct specification compared to aluminum
The choice of the positioner's body material depends on the installation environment and project requirements. Polycarbonate has specific advantages over aluminum, although it is not the correct material for all applications:
- Polycarbonate — correct in corrosive environments where aluminum degrades: Polycarbonate does not corrode or rust in the presence of acid vapors, alkalis, and saline environments. It is the correct specification in coastal plants, chlorine water treatment plants, and environments with aggressive vapors. Aluminum, on the other hand, can exhibit surface corrosion that compromises the instrument's seal in the long term.
- NEMA 4X — North American industry standard, as it is equivalent to IP66 with additional corrosion resistance: The NEMA 4X certification guarantees sealing against pressurized water jets and corrosion resistance.
It is the required standard in many instrumentation specifications for petrochemical and process plants in Mexico, the U.S., and Canada, since the engineering standards of those plants refer to NEMA instead of IP.
- Reduced weight — since polycarbonate is lighter than aluminum: The lower weight facilitates installation on small actuators and mounting in positions where the positioner's weight is a consideration. Likewise, it reduces stress on the actuator connections in installations with vibration.
Single-acting — behavior upon loss of pneumatic supply
The single-acting positioner is compatible with single-acting actuators — spring return. This is the most important criterion when specifying the positioner, as it must match the type of actuator in the system:
- Single-acting — correct when the actuator has a return spring: The single-acting positioner regulates the pressure in the actuator's active chamber. Upon loss of pneumatic supply, the spring returns the actuator to the predefined safety position. Therefore, it is the standard specification for control valves with single-acting diaphragm actuators and shutoff valves with fail-closed operation.
- Not compatible with double-acting actuators — since those require a double-acting positioner: If the actuator is double-acting, the double-acting SIPART PS2 must be specified. Although the 4-20 mA signal is the same, the single-acting positioner cannot correctly control a double-acting actuator.
Technical specifications of the SIEMENS SIPART PS2 single-acting positioner
| Parameter | Value |
|---|---|
| Manufacturer / Model | Siemens / SIPART PS2 |
| Type of action | Single-acting — single-acting actuators |
| Input signal | 4-20 mA |
| Maximum current | 100 mA |
| Maximum voltage | 35 V DC |
| Supply pressure | 1.4 to 7 bar (20.3 to 101.5 psi) |
| Body material | Polycarbonate |
| Protection rating | IP66 / NEMA 4X |
| Operating temperature | -30 °C to +80 °C (-22 to 176 °F) |
| Relative humidity | 0 to 100% |
| Integration | DCS, PLC, SCADA — standard 4-20 mA signal |
| SKU | PPNS01001 |
SIPART PS2 vs. generic positioner — comparison table to justify the brand specification
| Criterion | Generic 4-20 mA positioner | SIEMENS SIPART PS2 ← This product |
|---|---|---|
| Long-term technical support | ⚠️ Depends on the manufacturer — may be discontinued | ✅ Siemens guarantees support and spare parts for decades |
| Technical documentation | ⚠️ Varies by manufacturer | ✅ Complete and updated documentation on Siemens Industry Online Support |
| Integration with Siemens DCS | ⚠️ Requires additional configuration | ✅ Native integration — same engineering platform |
| NEMA 4X certification | ⚠️ Not always available in generic models | ✅ IP66 and NEMA 4X — covers North American plant specifications |
| Temperature range | Typically -20°C to 70°C | ✅ -30°C to 80°C — wider range than most generic models |
| Initial cost | ✅ Lower — for projects without a specific brand requirement | Higher — justified in plants with a Siemens standard or NEMA 4X requirement |
Main applications of the SIEMENS SIPART PS2 positioner in the process industry
- Plants with Siemens SIMATIC PCS 7 DCS where instrumentation standardization is a requirement: In plants using SIMATIC PCS 7 as a control system, the SIPART PS2 is the standard positioner that integrates without additional configuration. Standardization of instrumentation with the same DCS manufacturer also simplifies maintenance and technical personnel training.
- Outdoor or wet environments where NEMA 4X certification is a specification requirement: In petrochemical plants, refineries, and process plants in Mexico and the U.S. with instrumentation specifications referring to NEMA 4X, the SIPART PS2 directly meets that requirement. The polycarbonate body also resists corrosion from coastal environments and aggressive vapors.
- Control of linear control valves in critical processes where positioner reliability is a priority: In critical process control loops — temperature, pressure, flow — positioner reliability directly impacts plant availability. The SIPART PS2 is therefore the correct specification when the cost of an unscheduled shutdown significantly exceeds the additional cost compared to a generic positioner.
- Power, chemical, and petrochemical plants where the -30°C to 80°C temperature range is necessary: In environments with extreme temperatures — plants in cold climates or near heat sources — the extended range of the SIPART PS2 covers conditions that standard positioners from -20°C to 70°C do not reach. The instrument operates across the entire range without restrictions and does not require additional thermal protection.
- Modernization projects where the end customer specifies SIEMENS as the instrumentation standard: In plant tenders where the instrumentation schedule specifies Siemens, the SIPART PS2 is the required reference positioner. Cematic supplies it with stock available in Mexico, therefore reducing delivery times compared to direct importation.
For the complete range of positioners and more information about the SIPART PS2, see the positioner collection → or contact technical support →
