WCB Knife Valve | EPDM Seat | Bi-directional | Manual

In stock
SKU: PKNE014
Regular price $957.00 USD
Extent

WCB Knife Gate Valve with EPDM Seat — Bidirectional, Ultra-Thin Body

The WCB knife gate valve with EPDM seat is the most abrasion-resistant variant in the Cematic knife valve family — its EPDM rubber liner protects all internal metal surfaces from erosion by solid particles, tailings, and abrasive slurries that would directly wear down the metal in uncoated versions. Unlike unidirectional knives, this model is bidirectional — the knife seals tightly in both flow directions, simplifying installation by eliminating the risk of mounting the valve in the wrong direction. The two-piece wafer-style ultra-thin body design is more compact than yoke designs — an advantage in installations with limited axial space between equipment.

The EPDM Seat — Elastic Protection Against Abrasive Particles

The EPDM seat in a knife gate valve serves a different function than the PTFE or metal seat in previous versions:

  • Protective elastic liner: EPDM is not just the sealing element — it lines the contact area between the knife and the body, absorbing the impact of abrasive particles carried in the flow. Instead of hard particles striking the metal seat directly, they first hit the EPDM elastomer, which absorbs and distributes the impact energy.
  • Bidirectional sealing: The elasticity of the EPDM allows the seat to adapt to the micro-irregularities of the knife surface on both sides — providing a tight seal regardless of the pressure direction. Rigid PTFE requires a more precise seat geometry to seal in both directions.
  • Self-cleaning through elasticity: Elastic EPDM tends to expel solid particles lodged between the seat and the knife during opening and closing — the elastic deformation of the seat as the knife passes throws the particles out of the sealing area.
  • Operating temperature up to 110 °C: EPDM is the correct material for hot water, moderately tempered process sludges, and aqueous fluids up to 110 °C. Above this limit, versions with PTFE or metal seats (up to 180 °C) are the correct specification.

Bidirectional — Simplifies Installation and Specification

Unidirectional knife gate valves have a flow direction indicated on the body and must be installed correctly to seal. The bidirectional valve eliminates this restriction:

  • No critical flow direction: The valve seals in both directions — the installer does not need to check the flow orientation before mounting the valve
  • Backpressure protection: In lines where pressure may exist in both directions (pump systems with the possibility of reversal, bidirectional bypasses), the bidirectional valve seals correctly in any scenario
  • Simpler specification: Since no flow direction indication is required, the project's technical specification is simpler, and the risk of field mounting errors is eliminated

Two-Piece Ultra-Thin Body

The ultra-thin body design (minimum face-to-face according to the dimensions table) with two-piece construction distinguishes this valve from the conventional yoke design:

  • Less axial space: The 58–90 mm face-to-face (depending on diameter) is significantly smaller than that of yoke knives — a more compact valve that takes up less space in the line
  • Lighter weight: Without a tall structural yoke, the valve weighs considerably less than yoke versions — an advantage in overhead installations and load-limited structures
  • Installation between standard flanges: The ultra-thin profile allows installation in spaces where yoke knives would not fit

Valve Components

No. Component Material
1 Cover Carbon steel
2 Bolt B7
3 Gasket EPDM
4 Body WCB
5 Seat EPDM
6 Disc (knife) SS304
7 Packing EPDM
8 Gland WCB
9 Stem 2Cr13 (martensitic stainless steel)
10 Plate Carbon steel
11 Connection disc WCB
12 Yoke sleeve Copper alloy
13 Bearing GCr15
14 Handwheel Malleable cast iron

Technical Specifications

  • Type: Bidirectional knife — vertical linear motion
  • Body design: Two-piece, ultra-thin
  • Installation: Between flanges — Class 150LB
  • Body material: WCB (ASTM A216 Gr. WCB)
  • Disc (knife): SS304
  • Seat: EPDM
  • Gasket: EPDM
  • Packing: EPDM
  • Stem: 2Cr13 (martensitic stainless steel)
  • Operation: Manual with malleable cast iron handwheel
  • Maximum pressure: 290 psi (20 bar) at 38 °C — derated with temperature according to ASME B16.34/B16.5
  • Seat test pressure: 0.8 MPa (8 bar)
  • Operating temperature: -20 °C to +110 °C
  • Flow direction: Bidirectional

Comparison — Four Cematic Knives

Criterion WCB + EPDM ← This WCB + Viton (pneumatic) SS316 (pneumatic) SS316 (manual)
Body WCB WCB CF8M (SS316) CF8M (SS316)
Knife SS304 SS304 SS316L SS316L
Seat EPDM — elastic, protective Viton — elastic, HC resistant PTFE or metal PTFE or metal
Flow direction ✅ Bidirectional Unidirectional Unidirectional Unidirectional
Maximum temperature 110 °C 180 °C 180 °C 180 °C
Actuator ✅ Manual — handwheel included Double-acting pneumatic Double-acting pneumatic ✅ Manual — handwheel included
Body design ✅ Ultra-thin — more compact With yoke With yoke With yoke
Diameters 2" to 12" 2" to 18" 2" to 18" 2" to 18"
First choice for ✅ Abrasive mining, ash, cement, sludges with hard particles Non-corrosive WWTP, municipal sludges Corrosive sludges, H₂S, aggressive industrial processes Occasional isolation in corrosive sludges

Fluid Compatibility

  • ✅ Non-corrosive municipal and industrial wastewater
  • ✅ Primary and secondary WWTP sludges
  • ✅ Tailings and mineral slurries with abrasive particles
  • ✅ Fly ash and limestone sludges in thermoelectric plants
  • ✅ Cement, clinker, and slag mixtures in the cement industry
  • ✅ Viscous fluids with non-corrosive suspended solids
  • ✅ Anaerobic digestion sludges up to 55 °C
  • ⚠️ Fluids with high chloride or H₂S content: the WCB body may corrode — use SS316
  • ⚠️ Temperatures above 110 °C: use a knife with a PTFE or metal seat
  • ❌ Corrosive fluids (acids, alkalis): use an SS316 or PFA corrosion-resistant knife

Main Applications

  • Mining — tailings and abrasive slurries: The most demanding application for any knife gate valve. Mineral tailings (30–70% solids, quartz, silica, and hard mineral particles) erode bare metal rapidly. The EPDM liner absorbs abrasive impacts and extends the service life of internal surfaces. The bidirectional design is especially valuable in tailings circuits where flow direction may vary depending on pump operation.
  • Thermoelectric plants — ash and flue gas desulfurization (FGD) sludges: The hydraulic transport of fly ash, limestone sludges (FGD), and slag suspension represents the most abrasive fluids in the energy industry. The EPDM seat protects the WCB metal parts from the continuous impact of fine ash and slag particles.
  • Cement industry: Flow control of cement mixtures, clinker slurries, and slag in cement production facilities. The abrasiveness of these mixtures requires an elastomeric seat liner — EPDM is the standard material for these services.
  • Wastewater treatment plants — municipal sludges: Isolation of primary, secondary, and digested sludge lines in municipal WWTPs. Bidirectionality simplifies installation and project specification — eliminating the risk of incorrect mounting.
  • Pulp and paper — pulp and sludge lines: Flow control of cellulose pulp and process sludges in paper mills. The high abrasion resistance of EPDM significantly extends the seat's service life against pulp fibers and particles.
  • Chemical processes with non-corrosive solids: Process fluids with suspended particles where the fluid's corrosivity does not exceed the WCB's resistance — solid catalysts, pigments, process additives, and solid-containing reactant mixtures.

For chemically more aggressive sludges, see SS316 knife gate valve →

Data Sheet

Data Sheet